Skip to content

Alert types

Find which alerts exist today and what to check when you get one.

Last reviewed November 2, 2026

This page lists the alerts that can open today. Each type has its own rule. To see the rules with your current settings, open Settings, then Alerts.

Weather alerts

Frost risk

The app reads each field's overnight forecast. The alert opens when a coming night's lowest temperature is forecast to reach the frost threshold, or to come within a safety margin above it.

  • On by default, for the whole workspace.
  • Frost threshold: by default it comes from the crop in the field, or from a general value when the crop has none. You can set your own threshold instead.
  • Safety margin: how many degrees above the threshold already count as a risk.
  • Look ahead: how far ahead the rule looks at the forecast. You can change it. The editor shows the allowed range under each value.
  • Severity: Critical by default. You can lower it to Warning.
  • Each field has its own alert. Fields of the same farm with frost on the same night share one notification and one email, and show as one row in the inbox. See How alerts work.
  • The alert clears when the forecast warms up again, and expires once the night is over.

What to check: Check your frost protection for the night and look at the crop the next morning.

Weather warning

In Spain, the app turns the official weather warnings of the national weather service into alerts for the fields inside the warning zone. The alert shows the warning's own text.

  • On by default. The rule appears only in workspaces where the warnings service covers a farm.
  • Minimum level and Types of warning decide which warnings open an alert. By default every level counts, for rain, wind, thunderstorms, high and low temperatures, and snow and ice.
  • Yellow shows as Warning; orange and red as Critical.
  • When the service raises the level, the alert becomes more severe. When it cancels the warning, the alert clears.

What to check: Read the official warning and schedule your work around it.

Spraying alerts

Spray window

This alert tells you when a good period for spraying is coming up on a field. It uses the same hour-by-hour spraying conditions as the field's weather.

  • Off by default, and set per field. You switch it on for each field where you want it. See Alert rules and overrides.
  • It opens when a run of good hours, at least as long as the Shortest window you set, starts within the Look ahead time.
  • Its severity is Info.
  • It is advice. It does not tell you that spraying is allowed. Always follow the product label.

What to check: Schedule treatments inside the window and check the forecast again before you start.

Satellite alerts

These alerts come from the satellite images of your fields. They need clear images, so they can only open after a cloud-free pass.

Note

Satellite alerts are for information only for now. They open as Info and appear in the app only, never by email. See How alerts work.

Vigour drop

The crop's vigour in the images has dropped by a set percentage below its recent level, and later clear images confirmed it. The rule takes the harvest into account.

What to check: Look at the crop in the field. The satellite shows less green, not why.

Uneven growth

Parts of the field grow much more unevenly than usual for this season. This alert is only for fields large enough for detailed images.

What to check: Compare the weaker and stronger parts of the field on the ground.

Crop cycle ended

After its peak, the field looks close to bare soil, so the crop may have been harvested. Owners, admins and editors can close the crop cycle from the alert, with Close the crop cycle. The alert expires on its own after a while.

No clear image

No usable clear image of the field has come in for a set number of days, usually because of clouds. The alert clears when a new clear image arrives.

What to check: Check the weather, and go to the field if you need a current view.

Types that don't open alerts yet

Not available yet

Some rows on the alert rules page don't open alerts yet. Rows marked Coming later have no switch and never open an alert: Heat risk, Water stress, Irrigation need and, in Spain, Field outlines to check. Rows marked Not switched on yet are not available either. New clear image is meant for a summary email, which is not available yet. If you switch it on, it only adds a notification in the app when a new clear image arrives.

Still stuck?Email support.truleaf@truleaf.org