If you don't have a file, drawing is the quickest way to add a field. Trace the outline on the aerial image, name the field and save it. The outline is checked as you draw, and the field's satellite history starts loading as soon as you save.
Before you start
- You need to be an owner, admin or editor of the workspace.
- Your plan limits the fields and hectares a workspace can have. The Free plan allows 1 field and 10 ha, and the trial 1 field and 100 ha. On the Grower plan there is no limit on fields, and the area follows the hectares you pay for. On the Advisor plan there is no limit on fields either, and the hectares are the ones set in your agreement with us.
- Drawing works best with a mouse or a finger on a large screen.
Choose the farm and the drawing method
- Select Add fields at the top of the field list or the map.
- Under Farm, choose the farm the field belongs to. To add a farm, select New farm and follow Add a new farm.
- Choose Draw on the map and select Continue.
The page Draw a field opens, with the map centred on the farm. If your workspace has no farm yet, selecting Continue creates the first farm from your workspace details.
Add a new farm
- Select New farm.
- Enter the Name. The name starts as your workspace's name, and the country and time zone start from your workspace. Choose a region if you want one, and change the rest if this farm is elsewhere.
- Under Where is the farm?, type an address, a village or coordinates, then press Enter or select Search. Choose the right place in the list.
- Select Save. You see Farm created, and the new farm is selected.
A farm can't be renamed or deleted in the app yet, so check its details before you save. If you need a change later, write to support.truleaf@truleaf.org.
Draw the outline
- To move the map to the field, type an address, a village or coordinates in Go to an address, then press Enter or select Search. Choose the place in the list, and the map moves there.
- Draw part is selected. Click on the map to start the outline. Double-click or click the first point to finish.
- Click each corner of the field in turn.
- Select Finish part on the map. It closes the outline on the corners you placed and stops drawing. The button works once the outline has enough corners to close. You can also close the outline yourself by clicking the first point again or double-clicking the last corner.
- If the outline would cross itself or is too small, you see why and can keep drawing. Fix the corners and try again.
Once the outline is closed, the panel shows its area.
The outline is now on the map. To correct it, select Edit points. The map then shows the hint Drag a corner to move it · drag a small mid-point to add a corner. Undo and Redo are next to the drawing tools.
To remove a corner:
- In Edit points, select the part that has the corner. The map shows the hint Tap a corner, or centre it on the map, then Delete point.
- Tap or click the corner you want to remove. With a keyboard, move the map with the arrow keys until the corner is in the middle instead.
- Select Delete point. It removes the corner you picked, or, if you didn't pick one, the corner nearest the middle of the map.
A corner is not removed when the outline would cross itself or become too small.
Cut out buildings, ponds or tracks
An exclusion takes ground that isn't crop out of the field's area.
- Select Add exclusion.
- Draw the area to leave out inside the field, the same way as the outline.
- Select Finish exclusion. It closes the area and stops drawing.
A field can also have several separate parts, for example both sides of a track. Select Draw part again to draw another part.
Check and save the field
- The outline is checked a moment after each change, and you see Checking… while the check runs. You can also select Check.
- Read the result. It gives the area, says whether the outline is Valid, Repaired or Can't be used, and how much satellite detail a field of this size gets.
- Enter the Field name.
- Select Save outline.
You see a message with the saved area, and the new field opens. Its satellite history starts loading. See How satellite monitoring works.
If you select the back arrow at the top of the page before saving, a dialog asks Discard your drawing? Select Keep editing to go back to your drawing. If you close the browser tab, the browser asks you first. Other links leave the page without asking, so save before you follow them.
When the field overlaps another
If the new outline overlaps an existing field by more than a few percent of either field, the check names that field and how much they overlap. A slight touch along a shared edge is not flagged. When you save, you see It overlaps another field. Tick Keep both to save.
- If both fields are right, for example a field inside an orchard, tick Keep both and save.
- If not, correct the outline with Edit points.
Common problems
- The lines cross. You see Lines cross. Redraw this part. Undo the last points or redraw that part. When saving, this shows as
This outline can't be used
. - The outline is very small. You see Too small. Draw at least 100 m².
- The outline is too big or too detailed. There is an upper limit on a field's area and on how many corners it can have. You see
This outline is too large
orOutline has too many points
- The field is tiny. Very small fields can be saved, but they get no satellite values. See Field status messages.
- It overlaps another field. You see
Overlaps another field
Tick Keep both, or change the outline. - Your plan is full. You see A new field can’t be added on this plan. or
Plan limit reached
See The free trial. - The place isn't found. You see We couldn't find that place. Try a village name or paste coordinates. When search is slow or not available, type coordinates instead, for example the ones your phone's map app shows.
- The save failed. You see Not saved. Your drawing is still here. Check your connection and save again.
- You can't draw at all. Your role can't add fields, or the workspace is read-only. Ask an owner or admin of the workspace.
Related pages
Still stuck?Email support.truleaf@truleaf.org