Skip to content

Photos and locations

Add photos to an observation and mark the exact spot with your phone's location, a point on the map or coordinates.

Last reviewed November 2, 2026

Photos and a location make an observation easier to understand later. Only observations take them. Treatments have no photos and no point.

Take a quick photo

To note something fast while you're in the field:

  1. Select Record in the logbook, or Record in the phone bar.
  2. Choose Photo only: Take the photo now and add the details later.
  3. The camera opens. If it doesn't, select Add photo.
  4. Choose the kind of observation and save. Add more details now, or edit the record later.

Add photos to an observation

  1. In the observation form, go to Photos.
  2. Select Add photo. On a phone, the camera opens, and you can also choose photos you already took. On a computer, you can drag photos onto the section. It says Drop photos here, or use Add photo.
  3. While the photos are prepared, you see Preparing photos…
  4. Select a photo to see it large, with the time it was taken for a JPEG photo. You can remove it from there.

The counter in the section header shows how many photos you have added and how many fit. An observation holds a limited number of photos. To add another once it is full, remove one.

Photos can be JPEG, PNG, WebP or HEIC, each up to a size limit. A file that doesn't fit is refused right away, with the reason:

  • This file type isn't supported. Use JPEG, PNG, WebP or HEIC.
  • A photo over the size limit is refused with a line that names the limit. Take a new photo at a lower resolution, or choose a smaller file.

Note

Photos are added when you create an observation. You can't add or remove photos on an observation that is already saved.

What happens to your photos

Before a photo is uploaded, your device makes a smaller JPEG copy. It removes the details stored in the file, such as the camera's location. The file name stays on your device. For a JPEG photo, the form first reads the time and place it was taken, so it can offer them to you. PNG, WebP and HEIC photos don't give a time or a place.

The browser can't open some HEIC photos. Those are uploaded as they are, with the details stored in the file, and the form shows Preview not available instead of a thumbnail.

What happens after you save

  1. The record is saved first. You see Observation saved. Photos are uploading.
  2. Each photo then uploads in turn, with its progress.
  3. When every photo is up, the form closes.

If a photo doesn't upload, it shows Not uploaded. Select Retry on it. To stop trying, select Done. The observation stays saved without that photo. While photos upload, you can't change the rest of the form.

Mark the exact spot

In the Where section of an observation, under Location, choose how to set the point.

Use your device's location

  1. Select Use my location. Your browser may ask for permission first.
  2. While it searches, you see Finding your location…
  3. The point appears with its accuracy. If the accuracy is poor, the form says the location is approximate.

If your browser blocks location, you see Location is blocked for this site. Allow it in your browser settings, or pick the point on the map. If no position comes, you see Couldn't get your location. Try again outside, or pick on the map.

Pick the point on a map

  1. Select Pick on map. The Pick location sheet opens.
  2. Tap the map to place the point.
  3. Select Done.

Enter coordinates

  1. Select Pick on map.
  2. Under Enter coordinates, enter the Latitude and the Longitude: Decimal degrees, WGS84.
  3. Select Done.

Use the photo's location

If a JPEG photo carries the place it was taken and the form has no point yet, select Use the photo's location. It is under the location and in the large view of the photo. Other photo types don't offer it.

To clear the point, select Remove location.

When the point is outside the field

If the point is outside the field you chose, the form warns you. Choose Keep if the point is right, for example on the field's edge, or Pick again. Once saved, an observation with a point outside its field shows the warning Point outside the field.

See photos on a record

Open the observation in the logbook. Its photos are in the Photos card. Select a photo to see it full size and move between photos. If a photo can't be shown, you see Couldn't load photo.

In the logbook list, the With photos filter shows only observations with photos.

Common problems

Still stuck?Email support.truleaf@truleaf.org