Skip to content

Rain and crop water use

Compare the rain that fell on a field with the water the crop uses, for recent days and the coming week.

Last reviewed November 2, 2026

The water view of a field shows the rain that fell on it and an estimate of how much water the crop would use. Neither figure counts irrigation or the water held in your soil.

Note

Truleaf shows crop water use only. It does not recommend an irrigation amount.

Open the water view

  1. Open Fields and select a field.
  2. Select the Weather tab, then Water.

Read crop water use

The Water use, last 14 and next 7 days chart has these lines:

  • Reference evaporation (ET₀): how much water short grass would lose in this weather.
  • Water use (ETc): an estimate of what a healthy, well-watered crop at this stage would use. It is worked out from the reference evaporation and a crop factor (Kc) for the crop and its growth stage.

Reference evaporation (ET₀) is what short grass would lose in this weather; crop water use (ETc) is ET₀ × crop factor (Kc). Neither is an irrigation amount.

The tiles above the chart give the totals for the last week and the coming week. Most days use the FAO-56 method. On days when only the backup weather source is available, the figures come from a simpler method based on temperature alone. About this data shows which method each day used. ET₀ is modelled from the weather forecast. Station measurements are not connected yet.

Get crop water use for your field

Crop water use needs a crop cycle with a growth stage. The crop card says what is missing:

  • No crop cycle on this field: select Add a crop cycle.
  • Set the growth stage to see crop water use.
  • If the crop has no crop factor yet, you see only the reference evaporation.

The crop card shows the crop factor in use and where it comes from. Select Crop tab to change the crop cycle or its stage. See Crops and crop cycles.

A covered field, such as a greenhouse, shows no crop water use. FAO-56 crop coefficients do not apply under cover. ET₀ describes outdoor conditions.

Look back at the rain

The Rain card shows daily rain on the field.

  1. Choose a period above the chart, for example the current Crop cycle.
  2. Read the total for the period and the summary sentence under the chart.

Rain amounts are weather-model estimates for the field's location. They don't come from a gauge on your farm. If the history is shorter than the period you chose, the card says the date it starts.

Common problems

  • Outside the weather range Choose a shorter period.
  • Crop water use for this field couldn't load. Select Try again. The rain card keeps working on its own.
  • Loading the rain history for this location… The history for a new field takes a moment to arrive.

Still stuck?Email support.truleaf@truleaf.org