Skip to content

The index map and image dates

Open a field's satellite map, move between image dates, read the field's value and check single points.

Last reviewed November 2, 2026

The satellite map colours your field by a vegetation index, one image date at a time. Use it to see where the crop is stronger or weaker, and how that changes from one image to the next.

Open the satellite map

  1. Open the field, for example from Fields.
  2. Select the Satellite tab.

The map shows the latest clear image, coloured by the field's default index. The switch above the map offers Map and Series. Once the field has more than one image, it also offers Compare. This page covers Map.

You can also start from the field's Overview tab. Its Satellite card has Open.

Move between image dates

The date control at the top of the map has three parts.

  1. The arrows step to the previous or next image date.
  2. The date in the middle opens Choose image date. Each day is marked Clear image, Partly cloudy or No usable image. Pick a clear or partly cloudy day.
  3. All image dates, at the bottom of the calendar, lists every pass over the field, grouped by year.

You can filter that list by All, Clear, Partly cloudy or Too cloudy. Each row shows the satellite, how clear the field was and the field's value. Select a clear or partly cloudy row to open that date on the map.

The Recent image dates card lists the latest passes, with All image dates for the full list.

With a keyboard, the square bracket keys step to the previous or next date while the map controls have focus.

Read the value of the field

The value card in the panel sums up the image on screen:

  • the field's average value for the chosen index, and how much it changed since the previous clear image;
  • the range that covers most of the field, so a few odd pixels at the edge don't count;
  • a small chart of recent values, with Open series for the full chart;
  • the date of the last clear image.

Select What does this mean? for a short explanation of the scale. Compare a field with its own earlier images and with similar fields. A drop can mean stress, but also harvest, cutting or haze.

A partly cloudy image carries a badge with its clear share and the note Not used for trends or alerts.

Check the value at one point

  1. Select Inspect at the top of the map. On a narrow screen, it is under More as Inspect a point.
  2. A crosshair appears on the field. Click or tap the spot you want, or move the crosshair with the arrow keys.
  3. Read the value under Point value. Press Escape or select Close when you're done.

On a computer, you can also hover over the field to see the value under the pointer.

Where there is no value, the reading says No value here (cloud or shadow) or No value here (outside the field).

Change how the map looks

Select Display (under More on a narrow screen).

  • Stretch colours to this field: Shows small differences; turn off to compare fields and dates on the fixed scale.
  • Overlay opacity shows more or less of the background map through the image.
  • Smooth pixels: Blends 10 m pixels for a smoother look; values do not change.

The Legend card on the map shows the colour scale. It also says when the colours are stretched or smoothed.

See every field at once

A field's satellite map shows that field only. To see all your fields coloured by their latest value, use the workspace map. See Map layers and basemaps.

Common problems

  • The date you asked for isn't shown. If an image date has no usable image, the map opens the nearest date that has one and tells you.
  • No clear image on this date
  • Image could not be prepared
  • The image shows Image unavailable or Taking longer than usual. Select Try again, or try again later.
  • There is no point check. It isn't offered for true colour, or on fields that show a trend only. See Field status messages.
  • You can't pick older dates. The calendar stops where your plan's satellite history ends. See Satellite history by plan.
  • You're offline. Images you haven't opened before show Not available offline.

Still stuck?Email support.truleaf@truleaf.org